| Overview |
Features and Benefits |
Specifications |
Working Principle |
|
|
| |
| Ball Mill is crucial equipment for grinding after materials are crushed. It is an efficient tool for grinding various materials into powder. |
|
|
Application:
Ball Millis widely applied in cement industry, chemical industry, new building materials, fire-resistant materials, fertilizer, porcelain and glass industry etc. It has two ways of grinding: dry process and wet process. |
|
|
Features and Benefits:
1. The machine is made up of feeding part, discharging part, gyre part, transmission part (reducer, small transmission gear, motor, and electrical controller) and so on.
2. The hollow axis adopts the cast steel, and the lining can be replaced. The big rotary gear is forged from cast rolling gears.
3. The barrel body is inlaid with wearable plates.
4. The machine runs steadily and efficiently.
| |
Model |
Rev. of Barrel (r/min) |
Ball Load
( T ) |
Feed Size (mm) |
Finished Size (mm) |
Capacity (t/h) |
Power (kw) |
Weight (t) |
Ф900×1800 |
38 |
1.5 |
≤20 |
0.075-0.89 |
0.65-2 |
18.5 |
3.6 |
Ф900×3000 |
38 |
2.7 |
≤20 |
0.075-0.89 |
1.1-3.5 |
22 |
4.6 |
Ф1200×2400 |
32 |
3.8 |
≤25 |
0.075-0.6 |
1.5-4.8 |
45 |
12.5 |
Ф1200×3000 |
32 |
5 |
≤25 |
0.074-0.4 |
1.6-5 |
45 |
12.8 |
Ф1200×4500 |
32 |
7 |
≤25 |
0.074-0.4 |
1.6-5.8 |
55 |
13.8 |
Ф1500×3000 |
27 |
8 |
≤25 |
0.074-0.4 |
2-5 |
90 |
17 |
Ф1500×4500 |
27 |
14 |
≤25 |
0.074-0.4 |
3-6 |
110 |
21 |
Ф1500×5700 |
27 |
15 |
≤25 |
0.074-0.4 |
3.5-6 |
132 |
24.7 |
Ф1830×3000 |
24 |
11 |
≤25 |
0.074-0.4 |
4-10 |
180 |
28 |
Ф1830×6400 |
24 |
23 |
≤25 |
0.074-0.4 |
6.5-15 |
210 |
34 |
Ф1830×7000 |
24 |
25 |
≤25 |
0.074-0.4 |
7.5-17 |
245 |
36 |
Ф2200×5500 |
21 |
30 |
≤25 |
0.074-0.4 |
10-22 |
370 |
48.5 |
Ф2200×6500 |
21 |
30 |
≤25 |
0.074-0.4 |
14-26 |
380 |
52.8 |
Ф2200×7500 |
21 |
33 |
≤25 |
0.074-0.4 |
16-29 |
475 |
56 |
|
|
Working Principle:
This Ball Mill, a horizontal type and tubular running, has two warehouses. It runs along the outside gear. Materials spirally and evenly enter the first warehouse along the input hollow axis by input devices. In the warehouse, there is a ladder scale board or ripple scale board. Steel balls of different specifications are installed in the scale board. When the barrel body rotates, centrifugal force is produced. At the same time, the steel balls are carried to some height and then fall to grind and strike the material. After being grinded coarsely in the first warehouse, the material then enters into the second warehouse for regrinding. In the end, the powder is discharges by output material board. |
|
Primary Crusher
